Elo Touch Solution 1528L Manual de usuario descargar pdf (Pagina 33)

UserManual:1528L

SW200095RevA,Page33of39

Table 8 AccuTouch (resistive) Technology Touchscreen

Specifications

Mechanical

Construction

Top: Polyester with outside hard-surface coating with clear or

antiglare finish.

Inside: Transparent conductive coating.

Bottom: Glass substrate with uniform resistive coating. Top and

bottom layers separated by Elo-patented separator dots.

Positional Accuracy

Standard deviation of error is less than 0.080 in. (2.03 mm).

This equates to less than ±1%.

Touchpoint Density

More than 100,000 touchpoints/in² (15,500 touchpoints/cm²).

Touch Activation Force

Typically less than 4 ounces (113 grams).

Surface Durability

Meets Taber Abrasion Test (ASTM D1044), CS-10F wheel, 500

g. Meets pencil hardness 3H.

Expected Life Performance

AccuTouch technology has been operationally tested to greater

than 35 million touches in one location without failure, using a

stylus similar to a finger.

Optical

Light Transmission (per ASTM

D1003)

Typically 75% at 550-nm wavelength (visible light spectrum).

Visual Resolution

All measurements made using USAF 1951 Resolution Chart,

under 30 X magnification, with test unit located approximately

1.5 in. (38 mm) from surface of resolution chart.

Antiglare surface: 6:1 minimum.

Haze (per ASTM D1003)

Antiglare surface: Less than 15%.

Gloss (per ASTM D2457)

Antiglare surface: 90 ± 20 gloss units tested on a hard-coated

front surface.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39

Sin comentarios

Elo Touch Solution 1528L Manual de usuario Pagina 33